Here's what you have to do:
You have to remove the battery in order to gain access to the 3rd mounting bolt that holds the air filter in place. See the photo, the red arrow points to the bolt. It is 10 mm. The thick red cable is the positive wire going to the fuse box from the battery.
The second photo shows the front bolt holding the air filter housing in place.
The third photo shows the remaining bolt that must be removed.
Once all the bolts are removed, you can wiggle out the air filter housing and detach it from the incoming tube.
The following photo shows the output speed sensor, you can ignore this as we are replacing the input speed sensor.
See the next post on this take apart.
No comments:
Post a Comment